Contact Us
Sale TEL :0086-539-8036228
 MOB:    008618660962888
Fax: 0086-539-8025589
Address:Zhuanbu Industry Area,Linyi City, Shandong Province, China
  Industry News Location:Home > Industry News  
 
Using the block machine nine skills
   Author:山东东岳建材机械有限公司    Time:[2012-05-10]   Views:
 
 
Shandong dongyue building machine Co., LTD. Long committed to aerated autoclaved concrete block machine and baking-free block machine research,has always been leading China's baking-free brick machine and aerated autoclaved concrete block machine of development, the company motto of "keep improving, quality outstanding" the goal, try to meet customer demand, won unanimous favorable comment of customer, product reputation at home and abroad. In order to giveYuDongYue new and old customer better service, dongyue engineers summarize the using brick machine nine skills, help you do safety and quality production.
1 in the process of production, and the oil pump motor running sweaty can lead to motor burned down, the reason is the total pressure of valve equipment is too much. Should turn govern valve down, until the motor run normal Be a timely adjust and check is the operation condition of machine
2, hollow brick machine electric power system of power host line select 2 above 25 ㎜ aluminum wire or 16 ㎜ copper wire.when Equipment is under the normal operation ,the input voltage is high voltage 380 V-410 V, low voltage 330 V-360 V, the machine must have reliable grounding
3, when the new vibration is insufficient, the brick forming cycle is long or a loose brick can appear ,beacuse the down mould pressure dowm too much, the pressure inhibit the vibrating, should turn down the pressure valve .
4, cause mould, balance arms and host block machine parts appear open welding or damage, because the pressure of the down mould turn too low, the pressure can not lock the down mold, leading to a fully conscious of excessive vibration, which affects the whole equipment parts, should governing valve pressure builds up, to stabilize the vibrating force machine.
5, when a brick face loose, break off , or when the upper mould with down mould die move up, the reason is the pressure of the pressure head is too little: can't make brick position leading to loose.
6,the middle of brick occurrence,because the stress of hydraulic is too big , or vibration time is too short, the uppermould can not pressure in the place.
7 if governing valve fail, because the governing valve spring inside is damaged, should replace the spring.
8,if a cylinder leak oil, the reason is the cylinder of seal sealing the result is bad, should change in time the corresponding types of sealing parts.
9, concrete hollow brick machine operation shall read product manual carefully before production, each operating person should be comprehensive trained, until assessment qualified is good.