Aerated block machine main configuration
line.
1、 Raw material storage
Fly ash or sand,cement,lime,gypsum,aluminum paste should be stored separately in the materials stock yard, transport them to workshop when use them.
2、 Raw material dealing process
Put the fly ash or sand into the ball mill to mill via the conveyor belt, after milling, put the slurry into the slurry storage tank by slurry pump.
3、Batching, mixing and pouring process
The lime, cement will convey by conveyor to the dry powder measure scale to scale separately. The slurry convey by slurry pump then to the automatic scale;the power and slurry put into the mixer,pouring into the mould.
4、Curing,cutting
After slurry pouring into the mould, put the mould box into the curing room with 50~70℃. After 2-3 hours curing,the blocks become solid,using reversal crane carry the mould and block to demould on cutting cart. The cutting cart will take the block to level cutting machine,vertical cutting ,two sides cutting,and remove the top waste material.
5、 Autoclaved and finished product
Finished cutting using semi-product crane carry to the front of autoclave grouped,hoisting machine or dragger will drag steam trolley into autoclave to steam,after steamed 8 or 10 hours ,driven out by hoisting machine or dragger again,the finished block after separating,packing, transport the products by forklift to piled yard.
Ⅱ. Aerated block machine main technical configuration
As one of the three manufacturers in China,our aerated block production line includes Material operating system,
Pouring & Curing System, autoclave system,electronic control system..aerated block machine as follow: |