AAC machine 0086-539-8036228

咨询电话:0539-3628888 / 0086-539-3628999

财 务:0539-3800066

传 真:0539-3803888

地址:Zhuanbu Industry Area,Linyi City, Shandong Province, China

Your current position:Dongyue Machinery Group Co.,Ltd | Home | Prodcts | | Aerated concrete equipment
Details

 AAC Cutting Machine 

 

      Aerated Autoclaved Concrete block machine line cutting machine:

The cutting machine is the most important part of Aerated Autoclaved Concrete block machine line.The production is more than 50,000m3. The cutting machine is the necessary core equipment,and is the indispensable part to improve the production. Our factory’s product--JL series cutter, this equipment can achieve the cutting goal instantly, six turn over cutting, because its advanced craft, there is no need of the second time hoisting, so can reduce the damage of th body because of multiple hoisting. Therefore, this product have been sold over the nation,and gain high praise from the ueser.With several years technological innovation,we have developed many kinds of models’concrete cutters.

      Aerated Autoclaved Concrete block machine line cutting machine’s working principle:

After turn the body on the over turning platform with the Base Plate,move towards the cutter until the small sliding table. After 90 degrees turn over, move the body from the small sliding table to the cutting position,cut the body’ four sides horizontally,then lengthwise cutting.After cutting ,move the body from the small sliding table to the over turning platform,turn the body on the counter-turnplate by 90 degrees with reversing direction.

    The usage of the cutter:

    To cut the body that after calmly palced and demoulded.

    The advantages of the cutter:

1.   Can realize the horizontal and vertical cutting by one time.

2.   Cut the body with six sides ,and the precision can achieve GB/T119691997.

3.   With this cutter ,there is no need of the second time hoisting, so can reduce the damage of th body because of multiple hoisting.

4.   Move the skin by six sides,the waste material dose not enter the autoclave,can be recycled.

5.   The structure is compact ,and the process of cutting , it is easy simple to operate ,can achieve automatically.

6.   The body can not be blocked together

7.   The transverse cutting uses the transmission of lead screw, can solve the question of  hydraulic transmission not the synchronized

8.   The mechanical system does not have the spacing and the interlock, may prevent the equipment accident which improper operation.

   Main technical parameters

No

Title

Unit

Index

remark

1

Production capacity

Ten thousand m3/year

10-30

Annual output

2

Body sizes

M

6*1.2*0.6

Net

3

Cutting modulus

mm

5/10

vertical cutting /horizontal cutting

4

Cutting precision

mm

±3±1.5±1.5

Lengthwidthheight

5

production cycle

Min/mould

6

 

6

The weight of the host cutter

T

18

vertical cutting /horizontal cutting

7

installed capacity of the host cutter

Kw

12.9

Including the hydraulic station